Hollow Bulb & Tail
DRAWING ITEM IDENTIFICATION: HOLLOW BULB & TAIL: A" BULB X D" HOLE X B" OA WIDE X C" THICK TAIL TO COMPOUND NUMBER SUXXXXX. (SEE PAGE H-3 FOR COMPOUND OPTIONS.)
SPECIFICATION CALL OUT: IDENTIFY SEAL AS A FULLY MOLDED OR EXTRUDED PROFILE. (NOTE: FULLY MOLDED SEALS HAVE A MUCH TIGHTER DIMENSIONAL TOLERANCE THAN EXTRUDED PROFILES.) INCLUDE THE MATERIAL REQUIREMENTS AS STATED ON PAGE H-3.
SPECIFY CLADDING THICKNESS AND DEGREE OF COVERAGE AS REQUIRED.
| A-DIM | B-DIM | C-DIM | D-DIM | R-DIM |
| 7/8" | 3"** | 5/16" | XX | 1/8" |
| 1" | 5"** | 1/2" | XX | 7/16" |
| 1" | 6"** | 5/16" | XX | 3/8" |
| 1-1/4" | 6"** | 1/2" | XX | 3/16" |
| 1-1/2" | 6"** | 1/2" | XX | 1/4" |
| 1-3/4" | 7"** | 9/16" | XX | 5/16" |
| 1-3/4" | 7"** | 11/16" | XX | 1/4" |
| 1-3/4" | 7"** | 7/8" | XX | 5/16" |
| 1-3/4" | 7"** | 3/4" | XX | 5/16" |
| 2" | 7"** | 5/8" | XX | 3/8" |
| 2" | 7"** | 3/4" | XX | 1/4" |
| 2" | 7"** | 7/8" | XX | 3/16" |
| 2" | 7"** | 1" | XX | 1/4" |
| 2-1/8" | 6"** | 3/4" | XX | 3/8" |
| 2-1/4" | 6"** | 9/16" | XX | 5/16" |
| 2-1/4" | 9"** | 3/4" | XX | 5/16" |
| 2-1/4" | 9"** | 1" | XX | 1/4" |
| 2-3/8" | 7"** | 1" | XX | 1/4" |
| 2-1/2" | 5"** | 1" | XX | 1/2" |
| 2-1/2" | 6"** | 7/8" | XX | 3/4" |
| 2-3/4" | 9-1/2"** | 1" | XX | 3/8" |
| 2-3/4" | 9-1/2"** | 3/4" | XX | 3/8" |
| 3" | 7"** | 1" | XX | 7/16" |
| XX | XX | XX | XX | XX |
