Center Dome Seal - Style 1 Transitional to a Flat Outside Bulb - 90 Degree Corner
DRAWING ITEM IDENTIFICATION: CENTER DOME SEAL - STYLE 1: TRANSITIONAL TO A FLAT OUTSIDE BULB 90 DEGREE CORNER. SEE NOTE BELOW.
SPECIFICATION CALL OUT: IDENTIFY AS A FULLY MOLDED SEAL. INCLUDE THE MATERIAL REQUIREMENTS AS STATED ON PAGE H-3.
SPECIFY CLADDING THICKNESS AND DEGREE OF COVERAGE AS REQUIRED.
| A-DIM | B-DIM | C-DIM | D-DIM | E-DIM | F-DIM | G-DIM | R1-DIM | R2-DIM |
| 1-3/4" | 5-5/8" | 5/8" | 1" | 5/16" | 1/2" | 1/4" | 11/16" | 9/16" |
| 1-3/4" | 6-1/4" | 7/16" | 3/4" | 1/8" | 9/16" | 3/32" | 7/8" | 3/8" |
| 1-15/16" | 5-5/8" | 5/8" | 1-3/16" | 5/16" | 11/16" | 1/4" | 11/16" | 9/16" |
| XX | XX | XX | XX | XX | XX | XX | XX | XX |
| NOTE: MATCH "A" DIMENSIONS FOR BOTH PARTS FOR PROPER SEAL ALIGNMENT. USE A 2" BULB AND TAIL WITH THE 1-15/16" DOME SEAL. |  |
SOLID BULB AND TAIL
| A-DIM | B-DIM | C-DIM | R-DIM |
| 1-3/4" | 7"** | 9/16" | 5/16" |
| 2" | 7"** | 3/4" | 1/4" |
| XX | XX | XX | XX |
