Center Dome Seal - Style 3 Transitional to a Flat Outside Bulb - 90 Degree Corner
DRAWING ITEM IDENTIFICATION: CENTER DOME SEAL - STYLE 3: TRANSITIONAL TO A FLAT OUTSIDE BULB 90 DEGREE CORNER: A" TALL X B" WIDE X C" THICK X D" LEGS X R1 DOME RADIUS X R2 RADIUS TO COMPOUND NUMBER SUXXXXX. (SEE PAGE H-3 FOR COMPOUND OPTIONS.)
SPECIFICATION CALL OUT: IDENTIFY SEAL AS A FULLY MOLDED OR EXTRUDED PROFILE. (NOTE: FULLY MOLDED SEALS HAVE A MUCH TIGHTER DIMENSIONAL TOLERANCE THAN EXTRUDED PROFILES.) INCLUDE THE MATERIAL REQUIREMENTS ON PAGE H-3.
NOTE: HOLLOW SECTIONS IN THE BASE OR CORE CAN BE APPLIED TO THIS PROFILE SPECIFY OPENING SIZE, PLACEMENT AND CONFIGURATION.
SPECIFY CLADDING THICKNESS AND DEGREE OF COVERAGE AS REQUIRED.
| A-DIM | B-DIM | C-DIM | D-DIM | R1-DIM | R2-DIM |
| 1-3/4" | 8"** | 9/16" | 18" | 7/8" | 3/8" |
| 2" | 8"** | 7/8" | 18" | 1" | 3/16" |
| 2-1/4" | 7"** | 3/4" | 18" | 1-1/8" | 1/4" |
| XX | XX | XX | XX | XX | XX |
XX=YOUR SIZE
**=CAN BE MADE SMALLER THAN THIS MAXIMUM
SOLID BULB AND TAIL
| A-DIM | B-DIM | C-DIM | R-DIM |
| 1-3/4" | 7"** | 9/16" | 5/16" |
| 2" | 7"** | 7/8" | 3/16" |
| 2-1/4" | 9"** | 3/4" | 5/16" |
| XX | XX | XX | XX |
