Center Dome Seal - Style 3
DRAWING ITEM IDENTIFICATION: CENTER DOME SEAL - STYLE 3: A" TALL X B" WIDE X C" THICK TAIL X R1 DOME RADIUS X R2 RADIUS TO COMPOUND NUMBER SUXXXXX. (SEE PAGE H-3 FOR COMPOUND OPTIONS.)
SPECIFICATION CALL OUT: IDENTIFY SEAL AS A FULLY MOLDED OR EXTRUDED PROFILE. (NOTE: FULLY MOLDED SEALS HAVE A MUCH TIGHTER DIMENSIONAL TOLERANCE THAN EXTRUDED PROFILES.) INCLUDE THE MATERIAL REQUIREMENTS AS STATED ON H-3.
NOTE: HOLLOW SECTIONS IN THE BASE OR
CORE CAN BE APPLIED TO THIS
PROFILE. SPECIFY OPENING SIZE,
PLACEMENT AND CONFIGURATION.SPECIFY CLADDING THICKNESS AND DEGREE OF COVERAGE AS REQUIRED.
CORE CAN BE APPLIED TO THIS
PROFILE. SPECIFY OPENING SIZE,
PLACEMENT AND CONFIGURATION.SPECIFY CLADDING THICKNESS AND DEGREE OF COVERAGE AS REQUIRED.
| A-DIM | B-DIM | C-DIM | R1-DIM | R2-DIM |
| 1-3/8" | 7-1/2" | 1/2" | 2-1/4" | 1/4" |
| 1-3/8" | 7-1/2"** | 5/8" | 2-1/4" | 1/8" |
| 1-1/2" | 7-1/2"** | 5/8" | 2-1/4" | 1/4" |
| 1-1/2" | 7-1/2"** | 3/4" | 2-1/2" | 1/4" |
| 1-3/4" | 8"** | 9/16" | 7/8" | 3/8" |
| 2" | 6" | 3/4" | 1-11/16" | 1/4" |
| 2" | 8"** | 3/4" | 1-1/4" | 1/8" |
| 2" | 8"** | 7/8" | 1" | 3/16" |
| 2-1/4" | 7"** | 3/4" | 1-1/8" | 1/4" |
| 2-1/4" | 7"** | 1" | 1-1/8" | 1/4" |
| 2-1/2" | 5-1/4" | 1-1/4" | 1-1/4" | 1/8" |
| 2-1/2" | 7"** | 3/4" | 2-1/2" | 1/8" |
| XX | XX | XX | XX | XX |
