Center Dome Seal - Style 4 Flat 90 Degree Corner
DRAWING ITEM IDENTIFICATION: CENTER DOME SEAL - STYLE 4: FLAT 90 DEGREE CORNER: A" TALL X B" CENTER LINE WIDE X C" CENTER LINE WIDE DOME X D" WIDE TAIL X E" THICK TAIL X F" LONG LEGS X R1 RADIUS DOME X R2 RADIUS X R3 RADIUS TO COMPOUND NUMBER SUXXXXX. (SEE PAGE H-3 FOR COMPOUND OPTIONS.)
SPECIFICATION CALL OUT: INDENTIFY SEAL AS FULLY MOLDED PROFILE. INCLUDE THE MATERIAL REQUIREMENTS AS STATED ON PAGE H-3.
NOTE: HOLLOW SECTIONS IN THE BASE OR CORE CAN BE APPLIED TO THIS PROFILE. SPECIFY OPENING SIZE, PLACEMENT AND CONFIGURATION.
| 1-1/4" | 4" | 1" | 1-1/2" | 1/2" | 24" | FLAT | 1" | 1/2" |
| 1-1/2" | 4-1/2" | 1-5/8" | 2-1/2" | 1" | 24" | FLAT | 1/16" | 1/16" |
| 1-7/8" | 2-3/8" | 1/4" | 1-1/8" | 7/8" | 24" | FLAT | 3/4" | 1/4" |
| 2-1/4" | 3" | 7/8" | 1-1/2" | 1" | 24" | 4-5/8" | 5/8" | 1/8" |
| 2-1/4" | 5" | 2" | 2-1/4" | 5/8" | 24" | 8" | 1/4" | 1/4" |
| 2-3/8" | 5" | 2" | 2-1/4" | 3/4" | 24" | 8" | 1/4" | 1/4" |
| 2-3/4" | 3-15/16" | 1-11/16" | 2" | 1-1/2" | 24" | FLAT | 1/4" | 1/4" |
| 2-3/4" | 5" | 2" | 2-1/4" | 1-1/8" | 24" | 8" | 1/4" | 1/4" |
| XX | XX | XX | XX | XX | XX | XX | XX | XX |
