Flat Seal - Style 1
DRAWING ITEM IDENTIFICATION: FLAT SEAL - STYLE 1: A" THICKNESS X B" WIDTH X C DEGREE TAPER TO COMPOUND NUMBER SUXXXXX. (SEE PAGE H-3 FOR COMPOUND OPTIONS.)
SPECIFICATION CALL OUT: IDENTIFY SEAL AS A FULLY MOLDED OR EXTRUDED PROFILE. (NOTE: FULLY MOLDED SEALS HAVE A MUCH TIGHTER DIMENSIONAL TOLERANCE THAN EXTRUDED PROFILES.) INCLUDE THE MATERIAL REQUIREMENTS AS STATED ON PAGE H-3.
| A-DIM | B-DIM | C-DEG |
| 3/4" | 8"** | 17 |
| 3/4" | 8"** | 30 |
| 7/8" | 8"** | 17 |
| 7/8" | 8"** | 30 |
| 1" | 8"** | 5 |
| 1" | 8"** | 18-1/2 |
| 1" | 8"** | 17 |
| 1" | 8"** | 39 |
| 1-1/8" | 8"** | 17 |
| 1-1/2" | 8"** | 30 |
| XX | XX | XX |
**=CAN BE MADE SMALLER
THAN THIS MAXIMUM
