Flat Seal - Style 6
DRAWING ITEM IDENTIFICATION: FLAT SEAL - STYLE 6: A" THICKNESS X B" WIDTH X C" HIGH X D DEGREE TAPER X R1" RADIUS X R2" RADIUS TO COMPOUND NUMBER SUXXXXX. (SEE PAGE H-3 FOR COMPOUND OPTIONS.)
SPECIFICATION CALL OUT: IDENTIFY SEAL AS A FULLY MOLDED OR EXTRUDED PROFILE. (NOTE: FULLY MOLDED SEALS HAVE A MUCH TIGHTER DIMENSIONAL TOLERANCE THAN EXTRUDED PROFILES.) INCLUDE THE MATERIAL REQUIREMENTS AS STATED ON PAGE H-3.
| A-DIM | B-DIM | C-DIM | D-DEG | R1-DIM | R2-DIM |
| 9/16" | 7"** | 5/16" | 17 | 3/16" | 1/8" |
| 5/8" | 7"** | 3/8" | 15 | 3/16" | 1/8" |
| 3/4" | 7"** | 1/2" | 18 | 1/4" | 1/8" |
| 1" | 7"** | 3/4" | 44 | 1/2" | 1/4" |
| 1-1/16" | 7"** | 13/16" | 15 | 1/4" | 1/8" |
| XX | XX | XX | XX | XX | XX |
**=CAN BE MADE SMALLER THAN THIS MAXIMUM
